CYCLONE SYSTEM
OPERATOR’S MANUAL
5
15
°
20
°
ALIGNMENT TOOL
95-0728030
STEP 1:
Disconnect water to Cyclone, then turn
entire machine over to allow access to
nozzle jets.
STEP 2:
Place base of alignment tool flat against
bottom of Cyclone plastic body. Press end
of tool (opposite of desired angle) against
axle, then rotate nozzle arm to alignment
tool as shown.
STEP 3:
Use either the 20° or the 15° end of tool, adjust nozzle to align with angled
surface of tool. NOTE: 20° is the factory setting. Nozzles can be set at 15° if a
slower rotational speed is desired.
Axle
Alignment
Tool
Nozzle Arm
Plastic Body
