C-TECH
9
Call back
the last received call number
Slide and hold
S2
for 2 seconds. Short high, medium, and low tones will indicate an attempt to
call back.
If
call back
fails, there will be a long low tone.
Redial the last dialed number
Slide and hold
S3
for 2 seconds. Short low, medium, and high tones will indicate an attempt to
redial. If redialing fails, there will be a long low tone.
Resetting passkey
To reset the passkey on the
Headset
, power off the
Headset
while it is in pairing mode.
Features accessible from the Ericsson T39/T68/T68i/R520m
The
Headset
has 5 features that can be accessed from the Ericsson phones. To access these features,
enter the “Settings” menu on the Ericsson phone:
1. Make sure the
Headset
is paired with the phone and the
Headset
is within range
2. Open the “Extras” menu on the T39/R520m (“Connect” menu on T68/T68i)
3. Select
“Accessories”
4. Select
“HBH”
5. Select
“Settings”
The following features are listed in the “Settings” menu:
Ring Volume
The
Headset
ring volume can be remotely changed by Ericsson phones. To remotely change
the
Headset
ring volume:
1. Select
“Ring
Volume”
2. Use the Up/Down arrows (joystick on T68/T68i) or the number keys to change the
Headset
ring volume
Note: The Ericsson phones do not support 16 volume levels. The 16 volume levels on the
Headset
will be converted to 8 volume levels on the Ericsson phones.
Speaker Volume
The
Headset
speaker volume can be remotely changed by Ericsson phones. To remotely
change the
Headset
speaker volume:
1. Select
“ListeningVolume”
