Instruction Booklet
9-Series
6.Malfunction Messages
7.Key On Display
8.Warning Tone Setup
1
2
3
4
5
6
7
8
9
LCD
code
Status
Battery needs charging soon.
Low voltage, needs charging now
Over voltage
Over current
Park Brake is lost or faulted
Accelerator not aligns in center
Accelerator is broken or faulted
Motor is broken or faulted
Others
flashing
25
ITEM DESCRIPTIONS
Operation
Feature
Usage
Condition
Take the connector pin (KEY) of controller as determinant
signal, then converts it into digital codes.
ITEM DESCRIPTIONS
Initial Status
When scooter power on, the backlight and all LCD segments
will be tuned on for 3 seconds, then switch to the default
working mode automatically.
ITEM DESCRIPTIONS
Operation
Feature
The volume of warning tones of Parking light, Reverse, Horn,
Low voltage and Turn signal could be adjusted or turned off.
(except you cannot turn off the Horn)
When the controller sends out an error message, (LED)
starts flashing to wait for confirming and display the "Error
message code" as follows.
Function
Buttons
(A+B)
Status
Initial
Volume
Parking
LightWarning
Tone
Reverse
Warning
Tone
Volume
of Horn
Low Voltage
Warning
Tone
Turn Light
Warning
Tone
Less Loud
Less Loud
Loud
Less Loud
Less Loud
Volume
Loud
Less Loud
Normal
Quiet
Silent
>> Increase volume
<< Decrease volume
