User's Manual
HS-1500
TROUBLESHOOTING
Flash
Code
Description
Recommended Action
1
2
3
4
5
6
7
8
9
Motor Current
Over Limit Fault
Battery Fault
Left Motor Fault
Right Motor Fault
Left Park Brake Fault
Right Park Brake Fault
A-Series Bus
Communications Fault
User Interface Fault
Controller Fault
Motor current is over the controller
set limit.
Release the joystick to neutral and
try again.
Try charging the batteries.
Batteries may require replacing.
Check the batteries and cabling.
Check the left motor, connections
and cabling.
Check the right motor, connections
and cabling.
Check the left park brake motor,
connections and cabling.
Check the right park brake motor,
connections and cabling.
Consult a service agent.
Display PCB Fault Consult a service
agent.
Consult a service agent.
Here are some suggestions about solving problems you may have with your power chair.
There are 10 LED Self-Diagnostic Warning Lights on the Control Panel. To check the
Self-Diagnostic Warning Lights, turn the power chair on and count the number of flashes.
If the programmable parameter, Motor Swap, has been changed, then left and right hand
references in this table will need transposing.
※
Problem: All LED lights on joystick flash constantly.
※
Solution: Both Right and Left motors are on Neutral.
16
TROUBLESHOOTING
