19 / 32
The EVO6000 has three
audio ranges
, each has a tone, or range of tones, and a separate volume
level. The volume of all the tones is controlled by the
VOLUME
). Setting the
master
volume
(
VOLUME
) to zero will mute all tones. A deep, small target generates a quieter tone than a
shallow, large target. The
menu can be used to increase the number of tones in each range
from one to up to twelve, giving up to 36 tones in total.
Ground Balance (GROUND, TRACKING, AUTOSET)
The
ground balance
is the level the detector uses to ignore signals which are generated by
movement of the
search head
relative to the ground or changes in soil conditions. The level can be
set to track the correct
ground level
continuously (
TRACKING
), or to a level you choose. The
EVO6000 can suggest a level for you to choose (
AUTOSET
) or you can set a value manually
(
MANUAL
).
GROUND
Set the ground level manually.
TRACKING
Track the correct ground level continuously.
AUTOSET
Your EVO6000 will calculate a level for you.
Menu 3
The simplest way to set the
ground level
is to use
TRACKING
. When you chose this option the
GTRACK
indicator under the small digits on the left of the screen will light up, the EVO6000 will
continuously adjust the
ground level
, and the small digits will show the
ground level
being used.
To set the
ground level
manually choose
GROUND
put the search head on the soil or sand and then
repeatedly raise it and bring it back down. Use the
up and down buttons
to change the
ground level
. When the detector is silent and ignores the ground signal press the
OK button
.
To use a
ground level
automatically calculated by the EVO6000 choose
AUTOSET
put the
search
head
on the soil or sand and then repeatedly raise it and bring it back down. The EVO6000 will
calculate a
ground level
and display it on the screen. You can alter the level using the
up and down
buttons
. When the detector is silent and ignores the ground signal press the
OK button
.
When you use
GROUND
or
AUTOSET
and the ground conditions change, the EVO6000 will tell you by
flashing a
HI or LO message
on the small digits on the left hand side of the screen. You can correct
the ground level by repeating the
GROUND
or
AUTOSET
process.
Master Volume, Backlight and Bluetooth (VOLUME, BACKLIGHT,
BLUETOOTH, PAIR)
The
master volume
, which affects all tones, is controlled by the
VOLUME
setting.
VOLUME
The
master volume
level. Set to zero to mute all sound.
BACKLIGHT
Set the brightness of the
backlight
.
BLUETOOTH
Turn on
aptX™ Low Latency Bluetooth
to connect your
.
PAIR
Forget the current
headphones to PAIR to.