background image

 

An operator who is familiar with his instrument will be able to do an excellent job of 
determining object size, shape and depth before he digs. This technique is learned from careful 
analysis of the meter and audio signal coming from the detector. Each time a signal is heard, 
listen for any peculiar characteristics it may have, determine over how large an area you get a 
detector signal, and try to 'outline' the object before you dig. After digging up the object, 
compare the object size, shape, depth and position in the ground with signal information you 
received before digging. After careful analysis of many signals you will learn to 'read' the hidden 
target before digging. 
 
 

ACCESSORIES (OPTIONAL) AVAILABLE FROM C-SCOPE

 

 

Headphones: 

Headphones not only extend battery life but improve sensitivity by cutting 

extraneous noise. The headphones should be fitted with a standard stereo 1/4 inch (6.35mm) jack 
plug. The headphone socket is located under the protective cap in the battery housing. 

 
Rechargeable battery pack: 

A shrink wrapped pack of 8 high capacity rechargeable nicad 

batteries to replace the standard batteries and holder. 
 

Battery charger: 

The C-Scope battery charger is designed to charge the rechargeable pack 

quickly and safely. 
 
 

CHARGING BATTERIES 

 
A battery charge socket is provided for use with the C-Scope battery charger (see Accessories) 
and is located under the protective cap in the battery housing. (The smaller of the two sockets.) 
Inserting the charger will automatically remove the power from the detector so the charger must 
be removed to do a battery check. 

Do not attempt to recharge standard batteries

. It will take 

between eight and fifteen hours to fully recharge flat batteries with the C-Scope charging unit. 
 
For further information, and a price list, for all C-Scope  accessories  please  telephone         
(01233) 629181. 
 
 

THE IMPORTANCE OF THE RIGHT APPROACH 

 
Treasure hunting can be a profitable and rewarding hobby, if approached in a patient and diligent 
manner. Time spent researching to locate a worthwhile site for a search can be time wasted if 
your search is hasty and erratic. To achieve maximum results it is important then, to decide on 
your approach to any particular site in advance of the actual search. Tactics will be decided by 
the  type of site - it is more profitable to scan a small area thoroughly than to conduct a 
haphazard search of the total site. However, when the site is too far away for you to make several 
return visits, a plan should be adopted which gives maximum coverage, at the same time as 
indicating the most likely area for detailed search. 
 
Your detector alone is not a guarantee of successful treasure hunting. Any detector needs an 
operator and for the best results the operator needs the right approach, attitude and technique. 
Too many beginners neglect the importance of pre-planning and research before using their 
detector in the field, and patience and technique during the actual search. A successful search 

 

Summary of Contents for CS6PI













Reviews: