Page 1/
2
For any further information please do not hesitate to contact us: Tel.: +30 2108075387 Email:
The product is for race use only
Put the chain guard in place and pass the screws
(blueprint 7-10 forward &
5-8-9-11 for back)
without tightening them, just touch them to hold
the product in place.
Locally remove the protective film from fender
only where it will be screwed and place it on its position.
Then insert the screws (layout screws 3 & 4).
And just pass them.
Last you put the side screw that connects the fender
with chain protector.
All screws have an adjustment margin.
Align the fender and tighten the screws in the order
you put them. When it is finished, remove the protective
film as well from the fender.
With this product you can also put ON-Off tires,
there is enough gap.
Of course, it is not recommended for on-off use.
You can remove the fender and leave only the chain guard.
We wish you many and dry kilometers!
Thank you for choosing one of our products.
