4
4.5 TURN OFF LEARNING MODE
To turn the caller ID learning mode off you would send the following SMS command:
1234ADD OFF
And receive SMS confirmation:
DISABLE ADDING USER NUMBER
4.6 ADDING CALLER ID NUMBERS BY SMS
It is possible to add up to 1000 caller ID numbers into the system and to add the number
07847170001
you would
send the following SMS command as:
1234AD07847170001#
And receive an SMS confirmation as:
SET OK!
It is possible to add up to 8 telephone numbers in one SMS command. To do this, assuming you want to add 3
numbers as
11111111111 & 22222222222 & 3333333333
you would send the following command:
1234AD1111111111#22222222222#33333333333#
And receive an SMS confirmation as:
SET OK!
4.7 CALLER ID ACCESS RESTRICTION
It is possible for the administrator to restrict access of any of the caller ID numbers up to 250 times. To restrict the
number 07123456789 to access the system for only 15 times you would send the following SMS command:
1234LIMIT07123456789*015#
And receive an SMS confirmation:
SET OK!
Now the user can only access the system 15 times. On the 16
th
attempt the relay will not be activated.
If you want to add the same number again, it will need to be deleted first and then re-added.
4.8 DELETE CALLER ID NUMBERS
It is also possible to delete up to 8 telephone numbers in one SMS command. To do this, assuming you want to delete
3 numbers as
11111111111 & 22222222222 & 3333333333
you would send the following command:
1234DD1111111111#22222222222#33333333333#
and you will receive an SMS confirmation as:
DELETED
4.9 DELETING ALL CALLER ID NUMBERS BY SMS
To delete all the numbers in the caller ID list and to do this you would send the following SMS command:
1234FD
and receive the following SMS confirmation:
FD OK
5. ADMIN SYSTEM SMS FEEDBACK
The caller ID numbers can receive SMS confirmations if the system is activated, and the administrator can also choose
to receive them.
To enable administrator SMS confirmations, you would send the following SMS command:
1234SMS1#
And receive an SMS confirmation:
SET OK!
To disable administrator SMS confirmations, you would send the following SMS command:
1234SMS0#
And receive an SMS confirmation:
SET OK!
6. PERMISSION SETTING
The administrator can set it so that only authorised phone numbers programmed into the device can activate it, or
in free access mode so any phone number without limitations can activate the device.
To set the device to free access mode, you would send the following command:
1234ATH0#
And receive an SMS confirmation:
ANY CALLER ID
To set the device so only authorised users can activate it, you would send the following command:
1234ATH1#
And receive an SMS confirmation:
AUTHORIZATION CALLER ID
