USER MANUAL
- ENG -
www.cpa-piscine.it
pag. 25
Ver.00
–
AQ10MC-R32
–
2019-05-07
f.
Set proper temperature in order to get comfortable water temperature to avoid overheating or overcooling.
g.
Please don’t stack substances, which will block air flow
near inlet or outlet area, otherwise the efficiency
of the heater will be reduced or even stopped.
h.
Don’t use or stock combustible gas or liquid such as thinners, paint and fuel to avoid fire
.
i.
In order to optimize the heating effect, please install heat preservation insulation on pipes between
swimming pool and the heater, and please use a recommended cover on the swimming pool.
j.
Connecting pipes of the swimming pool a
nd the heater should be ≤10m
.
3. Safety
a.
Please keep the main power supply switch far away from the children.
b.
When a power cut happens during operating, and later the power is restored, the heater will start up.
c.
Please switch off the main power supply in lightening and storm weather to prevent from machine damage
that caused by lightning.
d.
Installation and any repairing should be conducted in the area with good ventilation. The ignition source is
prohibited during the operation.
e.
Safety inspection must be carried before the maintenance or repair for heat pumps with R32 gas in
order to minimize the risk.
f.
If R32 gas leaks during the installation process, all operations must be stopped immediately and call the
service center.
C. About your heat pump
1. Transportation
a. Always keep upright
b. Do not lift the water union (If so, the titanium heat exchanger
inside the heat pump may be damaged)
2. Accessories:
