C-MOR 6P
User Manual
Page 38
Over the following link you can access the camera’s configuration interface:
The settings there will be directly saved in the camera which might lead to problems accessing the
camera, especially in case of changes of the network configuration. In order to make the camera
accessible for C-MOR again, you have to immediately enter all changes of the IP address, the port or the
user settings into the C-MOR web interface under the item
“
Configuration
”
of the respective camera.
After changes in the camera configuration it might be possible that the camera has to be deactivated on
the C-MOR web interface for a short time. Then activate it again.
