Indicator light turns from flashing or
solid blue to flashing or solid green.
(1) Install the mobile phone holder in the slot of the back of
the remote controller as shown.
(2) Pull up the mobile holder.
(3) Put the mobile device on mobile holder.
(4) Adjust the mobile holder and mobile phone to the right
angle.
2
DF801
(4). Self-inspection and frequency match
Power on the aircraft, set it aside for 30 seconds for self-inspection. Wait until its indicator light turns from fashing or solid
blue to flashing or solid green, indicating the pairing has been successful.
3). Put the mobile device on mobile device support
4). Connect with the APP
(1). State of GPS signal after connecting APP with aircraft
When the APP is connected to the aircraft,the aircraft status indicator is green, indicating that the GPS signal is good and
the positioning is successful. Switch the flight mode on the remote control to the GPS mode, the aircraft can take off safely.
The indicator of aircraft shows green flashing,which means GPS signal is weak or no signal at all. Change flight mode to A
mode (The operation requires experienced skills, not suitable for novices).
Note: It is highly recommended to fly the drone after the green light turns solid (indicating there is strong GPS
signal).
Please choose wide and open flight environment. Tall steel buildings and metal materials will interfere the
compass and GPS equipment on the aircraft.
