C-Dax C-DIT400 Owner'S Manual Download Page 2

2

 

 

 

SAFETY PRECAUTIONS 

 

CDIT400 

 

AN IMPORTANT MESSAGE FOR OWNERS & OPERATORS OF C-Dax 

ATTACHMENTS/ACCESSORIES 

 

Be warned of the dangers of loading your ATV or other vehicle in excess of its carrying capacity. It is 

important to understand that any loads or attachments whether fastened to or placed on a vehicle or ATV will 

alter the stability or handling characteristics of that vehicle or ATV. 

Spray tanks or other equipment must be filled only to a level where the gross weight is within the load limit of 

the ATV or other vehicle. 

 

Safety is a primary concern in the design, manufacture, sale, and use of spray tanks and other equipment. 

As manufacturers of spray tanks and other equipment we want to confirm to you, our customers, our 

concern for safety. We take this opportunity to remind you about the simple, basic and common sense rules 

of safety when using spray tanks and other equipment. Failure to follow these rules can result in severe 

injury or death to operators and bystanders. 

 

It is essential that everyone involved in the assembly, operation, transport, maintenance and storage of this 

equipment be aware, concerned, prudent and properly trained in safety. 

 

This also applies to equipment that is loaned or rented to someone who has not read the owner’s manual 

and is not familiar with the operation of application equipment. 

 

 

NEVER EXCEED THE LOAD LIMIT CAPACITY OF THE ATV OR OTHER VEHICLE. 

 

ALL  ATV  AND  TRAILED  EQUIPMENT  TYRES  SHOULD  BE  INFLATED  TO  MANUFACTURERS 
RECOMMENDED OPERATING PRESSURES. 

 

PLEASE NOTE THAT FILLING THE SPRAY TANK OR OTHER EQUIPMENT COMPLETELY AND OR 
THE  ATTACHMENT  OF  ADDITIONAL  EQUIPMENT  TO  THE  ATV  MAY  EXCEED  THE  ATV’S 
MAXIMUM LOAD CAPACITY, AND  ADVERSELY AFFECT THE STABILITY OF THE  ATV OR OTHER 
VEHICLE. 

 

CARGO SHOULD BE PROPERLY DISTRIBUTED AND SECURELY ATTACHED. 

 

REDUCE SPEED WHEN CARRYING CARGO OR PULLING A TRAILER OR TRAILED APPLICATION 
EQUIPMENT AND ALLOW GREATER DISTANCE FOR BRAKING. 

 

NEVER ALLOW ANYONE TO RIDE ON YOUR SPRAYER OR OTHER EQUIPMENT. 

 

ALWAYS  FOLLOW  THE  INSTRUCTIONS  IN  THE  OWNER’S  VEHICLE  MANUAL  FOR  CARRYING 
CARGO OR PULLING A TRAILER. 

 

PROPER  MAINTENANCE  IN  LINE  WITH  MANUFACTURER’S  RECOMMENDED  MAINTENANCE 
PROCEDURES IS ESSENTIAL. 

 

BEFORE  APPLYING  CHEMICALS,  READ  THE  LABEL  OF  THE  CHEMICAL  MANUFACTURER  OR 
SUPPLIER FOR PERSONAL PROTECTIVE EQUIPMENT AND OPERATE AS RECOMMENDED. 

 

THE SAFETY  OF  ALL CHEMICALS  USED IN  AGRICULTURE IS  UNDER  THE JURISDICTION OF  A 
GOVERNMENT  AGENCY,  IE  N.Z.  MINISTRY  FOR  THE  ENVIRONMENT;  USA  ENVIRONMENTAL 
PROTECTION AGENCY.  FURTHER LOCAL GOVERNMENT OR STATE LAWS MAY APPLY. 

Summary of Contents for C-DIT400














Reviews: