C-Data FD704GW, User Manual

Page: 5 / 21

5
Indicator Description
1 PWR Power status
On: The ONU is power on
Off: The ONU is Power off
2 WIFI WIFI
Blinking
：
Data is being transmitted
On
：
Wi-Fi function Opens
3 LAN1-4 LAN port status
On: Ethernet connection is normal
Blinking: Data is being transmitted through the Ethernet port
Off: Ethernet connection is not set up
4 LOS GPON optical signals On: Optical power lower than receiver sensitivity ;
Off: Optical in normal
5 PON ONT Register
On: Success to register to OLT
Blinking: In process of registering to OLT
Off: Failed to register to OLT;
6 CATV CATV status
On
：
CATV optical normal
（
>-9dBm
）
Off
：
The CATV signals are not received
（
<-9dBm
）
1.5 environmental parameter
Item Specification
Dimension 200mm(L) x 140mm(W) x 33mm (H)
Rated current 1 A
Rated voltage 12 V DC
Operating temperature: 0 to 50ºC
Storage temperature: -40 to 85ºC
Operating humidity: 10% to 90%(Non-condensing)
Storage humidity: 5% to 95%(Non-condensing)
2. Introduce configuring the network
2.1 Prepare for login the ONT web management
Before you login the ONT, you should confirm the connect between the ONT and your PC
is normal.
Step 1 Configuring the IP address of your PC to 192.168.100.X
（
2~254
）
, subnet mask
is 255.255.255.0
，
.
Step 2 Ping IP address of the ONT (Default address is 192.168.100.1). If the PC can get
right reply from Ping command, it is mean the connecting between the PC and ONT is
normal.
【
Figure 1
】