Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
14
After finshed all of the configuration,click
‘Save/Apply’
button to finish
“
Static IP
”
setting.
5.4
View WIFI Router Internet WAN Connection Status
On WIFI router web main interface select
Advance -> Status -> status -> Wan Settings
,in
this interface,we can check the WIFI router whether get ip,if wan connect is successful and ip
address information .etc:
6
WIFI Router LAN Port Configuration
6.1
LAN IP Address And DHCP Server Configuration
1. In WIFI router web main interface select
Advance -> network -> LAN Settings
,then config
parameter as follows:
【
IP address
】
Set local management IP address of WIFI router. The default IP address is
192.168.1.1
【
Subnet mask
】
Set the mask of local management IP address of WIFI router
【
DHCP Type
】
Default config is ‘server’,means open WIFI router dhcp function,if we need
close dhcp function,we can select ‘Disabled’
【
DHCP Client Range
】
Configure the IP address interval that allocated to the terminal. The
address interval must be on the same network segment as the
management IP address of the ONU.
【
DHCP Lease Time
】
Config time which client hire ip address from DHCP server
【
Static DHCP
】
Bind ip address to some NIC mac address,so this NIC can use fix bind ip
address access to internet
【
DHCP Domain Name
】
If need name,we can fill in,if doesn’t need,we doesn’t need fill in
