9
TROUBLESHOOTING GUIDE
SYMPTOMS
POSSIBLE CAUSES
SOLUTIONS
The unit doesn’t work.
Wrong AC adapter.
Use with supplied adapter
only.
Defective AC-DC
adapter.
Replace it with a new
adapter.
A battery is inserted
and the ANALYZE
button is pressed, but
the charger does not
analyze.
Loose or bad contact.
Reinsert the battery and
secure it firmly. Press the
ANALYZE button again.
Lid closed.
Open the lid and press
the ANALYZE button
again.
The charger does not
leave the “analyze”
mode after 10 seconds
(i.e., the display anima-
tion is still running).
ANALYZE button held.
Release the ANALYZE
button.
Defective unit.
Contact your dealer.
Battery short circuit.
Remove the bad battery
and insert another battery.
Press the ANALYZE but-
ton again.
Defective unit.
Contact your dealer.
The charger does not
start to charge even
though the battery is
inserted and the lid is
closed.
Bad battery connection. Reinsert the battery,
making sure it is properly
connected.
Lid will not close.
Make sure the lid is
closed and locked in
place by pressing just
above the lid button.
Battery inserted with
wrong polarity.
Correct the polarity
Dirty contacts.
Clean the contacts with a
soft cloth.
Summary of Contents for QuickCharger
Page 1: ...Operating Instructions...