C. Crane CCRadio-SWP, Instruction Manual

Page: 18 / 32

Page 18 CCRadio-SWP
change the AM tuning steps from 10 to 9
kHz. The U.S. uses 10 kHz. Most of the rest
of the world uses 9 kHz steps. It could be
important to change the AM step rate if you
use the “Up” and “Down” button to scan for
stations and you happen to be in a foreign
country.
“FREQ ” UENCY Button
This is used to directly enter a frequency .
You must be in the radio band of your
choice before you enter a frequency. AM
and SW is straightforward. Press “FREQ”
and enter the AM or SW frequency using
the numbered keys. For FM you must enter
a last digit. To enter 100.3 FM you must
press “FREQ” and then press 1-0-0-3.
0-9 KEYS
These are used to directly enter a frequen -
cy or memory channel. See
}
“FREQ”-
UENCY button for direct entry.
While in
U
F AVORITES (Memory Scan)
mode you can also enter the channel num-
ber of a station you memorized. There is a
programming quirk, however. Because there
are 200 channels, you must key in 3 digits
for each number. Channel “00” through “9”
Featur es and Operation Explained
q
}