INETVU® MOBILE SYSTEM QUICK START – VIASAT AUTO-ACQUIRE
C-COM Satellite Systems Inc.
Page 6
1.3 Initial Controller Configuration and Verification Test with ViaSat
SurfBeam® 2 (Auto Acquire)
Once the system wiring with the Viasat modem is setup and the network configuration on your PC is
configured, you are required to configure the system parameters for the following before satellite
acquisition:
Communication Method between IMS and iNetVu® Controller.
Satellite Name, Longitude, and Transmit Polarization
Modem/VSAT Communication Parameters
The 7000 Controller may be configured via the Software Application / Web Interface / LCD interface.
Only one is necessary for complete configuration.
iNetVu® Software/Firmware Application (
preferred method
)
First time user should use the iNetVu Wizard which is imbedded into the iNetVu software for
guidance in configuring your system.
USB Connection
Ethernet Connection
iNetVu® Web Interface
Ethernet Connection
iNetVu® 7000 Front Panel
USB drivers must be installed for USB connection method. The configuration process is only required to
be done once as long there are no change in satellite, service, modem, or platform parameters.
