background image

  Copyright 2016 © C. B. Gitty Crafter Supply                                                                             15

 

 

AJ Gaither “Arkansas Tenor”—

$229.99 

The cigar box guitar designed & stage tested 

by the Midwest Troubadour!  Special EADB 

“Arkansas tenor” tuning .  Acoustic/electric.

 

Pro grade & handmade in New Hampshire. 

www.CBGitty.com/ArkansasTenor 

 

Tin Can Microphone Kit—$19.99 

Build your own real working microphone!   
Sounds like a vintage AM radio - perfect for  
vocals and harmonica.  Great for ages 12+  

www.CBGitty.com/MicKit

 

           Cigar Box Guitar Amps -  $54.99 and up 

             These custom amps are handmade in  
              our New Hampshire workshop. Great 
              for practice, studio &  busking.  

   

              www.CBGitty.com/guitar-amps

 

The Acoustic Pro Cigar Box Guitar - $299.99 

Rich, lush acoustic tones, designed for stage  
& studio use.  Depression Era ingenuity meets  
modern electronics.  Our finest sounding  

acoustic/ electric… ever

 

www.CBGitty.com/AcousticPro 

 

Complete Cigar Box Guitar Fretting  

Starter Kit:   $89.99    

Fret Saw & Miter Box, Fretting  

Hammer,  Bevel File, Fretting Scale Tem-

plates, 18 feet of fret wire,

 39-page Fretting 

Guide CD  

www.CBGitty.com/FretKit

 

PURE & SIMPLE 
CIGAR BOX 
GUITAR KIT 

 

$79.99 

 
The easiest 
cigar box 
guitar kit to 
build, bar 
none! 

Summary of Contents for GittyKits Gittylele Ukulele Kit

















Reviews: