background image

TROUBLESHOOTING 
 
If you are having problems with this unit, refer to these troubleshooting hints. Also, refer to the connection 
diagram to ensure your devices are connected properly.  

 

                       Problem                                                                 Suggested Action 

 

♦ 

I have no lights and no function at all. 

♦ 

Check fuse or main power. Check the main power plug and replace the fuse if 
required with the correct rated fuse.  

♦ 

If the fuse blows repeatedly, verify the devices connected to the unit are working 
properly and that they are not too large for the HUM-1 to safely control. 

 

♦ 

The device I am using rarely or never turns 
OFF. 

♦ 

In order for the HUM-1 to turn ON and OFF the device, it must be capable of 
raising or lowering the level to the set-point you have selected. If your set-point is 
either too high or too low, the unit will be commanded to remain on. If you cannot 
achieve the humidity level you would like, you may have to choose a device with a 
higher capacity. 

 

♦ 

The device I am using rarely or never turns 
ON. 

♦ 

Once you select the humidity level you want to maintain, the unit will automatically 
keep it at that level. If the unit is not turning the unit ON, it is indicating the humidity 
is within the acceptable range of +/- 7% rH.  

 

 
 
 PRECAUTIONS 
 
1) DO NOT expose the HUM-1 to water. The plastic enclosure is corrosion-proof, it is not water-proof. 
2) DO connect the HUM-1 to a source of dedicated 15-amp / 120 vac power. 
 
 
WARRANTY 
 
The HUM-1 is warranted against defects in workmanship for THREE years.  
 
 
 
 
 
 
 
 
SPECIFICATIONS

 

 
Main power voltage 

120vac 

Maximum amperage 

15-Amps @ 120vac 

Humidity control range 

20 - 80% RH with a 5% differential, +/- 7% 

Operating temperature range 

32-120° F 

Operating humidity range 

0-99% RH (non-condensing) 

Relay operations (minimum)  

100,000 electrical / 1,000,000 mechanical 

Weight 

Less than 4 lbs 

Dimensions 

8” X 6” X 3.5” 

 
 

PUBLISHED BY R & M Supply Inc. 

COPYRIGHT 2004 BY R & M Supply Inc. 

ALL RIGHTS RESERVED 

 

Liability statement: 
R & M Supply and their retailers and distributors are not responsible for any damage or injuries (consequential or otherwise) 
arising from the use of this device. The purchaser assumes all responsibility for the use and proper installation of this device.

 

Reviews: