BZBGEAR BG-UHD-VW24
PRODUCT MANUAL
PC Tool User Guide
The PC Tool control software supports both UART and network control. PC Tool consists
of five parts: Matrix Switch, Signal Setting, Fine Tune: PQ, Video Wall and CEC Control.
The UI is as follows:
Matrix Switch Tab
1. Select
UART
(with RS232 cable) or
Network
to connect to the device. Baud rate is
57600 bps.
2. Select an input source for each output.
3. “AllSet” function: Apply input HD A or B to all outputs.
4. Select the input source for B/MAIN output.
5. Select the audio source for balanced audio output and 3.5mm output.
6. Reset: Resets the device to factory settings.
7. EDID Control: Clicking the ‘EDID’ button will open the below EDID control window:
Address:
830 National Drive #140, Sacramento, CA 95834, USA
·
Tel:
+1(888)499-9906
·
Email:
9
