BZBGEAR BG-EXH-70C4
PRODUCT MANUAL
Operation Controls and Functions
T
RANSMITTER
P
ANEL
No.
Name
Function Description
1
Power LED
The red LED will illuminate when the transmitter is powered on.
2
EDID DIP
switch
Used for audio EDID setting (COPY on by default).
COPY: Copy the EDID of the HDMI OUT port of Receiver.
STD: Default 1080P 2CH
3
SERVICE
Firmware update port.
4
DC 24V
DC 24V/1A power input port.
Note
: The extender supports PoC functionality. Either the transmitter or receiver must be connected to
a 24V/1A power supply. The other does not require a power supply.
5
HDBT OUT
RJ45 port to connect to the HDBT IN port of the receiver using a CAT5e/6 cable.
6
Link Signal
Indicator
(Green)
Solid: The transmitter and receiver have a good connection status.
Flashing: The transmitter and receiver have a poor connection status.
Dark: The transmitter and receiver are not connected.
7
Data Signal
Indicator
(Orange)
Solid: HDMI signal with HDCP.
Flashing: HDMI signal without HDCP.
Dark: No HDMI signal.
8
HDMI IN
HDMI signal input port. Connect to the HDMI source device using an HDMI cable.
9
SPDIF OUT
Optical fiber audio signal output port.
10
IR IN
Connect to the IR receiver cable. The IR receive signal will emit to the IR OUT port of the receiver.
11
IR OUT
Connect to the IR blaster cable. The IR will emit a signal from the IR IN port of the receiver.
12
RS-232
3-pin Phoenix connector for RS-232 command transmission. The RS-232 command will pass
between the transmitter and receiver.
Address:
830 National Drive #140, Sacramento, CA 95834, USA
·
Tel:
+1(888)499-9906
·
Email:
7
