5
5.
Operation Controls and Functions
Number
Name
Function description
1
POWER LED
This blue LED illuminate when the device is
connected with power supply.
2
IN LED
This blue LED illuminate when the Source
connected to the device.
3
OUT LED
These blue LEDs will light up to indicate which
HDMI outputs are connected to an active TV/
display/monitor.
4
SERVICE
Firmware update use only.
5
EDID STD
When in 'STD' mode, the unit will use its own
built-in EDID settings. In this mode, the video
output will be set to 1080p@60Hz and the
audio output at LPCM 2CH Stereo. Use this
mode if there are display problems in TV Mode.
EDID TV
When in 'TV' mode, the unit will read the
EDID settings of the display device connected
to HDMI OUT 1. If it detects a 4K2K capable
EDID setting it will transmit the signal in that
format to all outputs. If no 4K2K capable EDID
is detected then the unit will output the best
resolution that all displays can support.
6
HDMI OUT
1~4
Connect each of the HDMI outputs to an HDMI
display for simultaneous HDMI distribution, or
