12
④
Press these buttons for select the input sources.
⑤
Press this button for select HDMI output resolution. (Press and hold 5 seconds or more,
the HDMI output resolution will reset to 720p60Hz.)
⑥
Menu operation buttons:
MENU: press to enter in OSD menu.
EXIT: press to exit OSD menu.
OK: confirm button.
UP/DWON/LEFT/RIGHT button: for OSD value setting.
⑦
VOL-/+: decrease or increase audio volume, MIC-/+: Unused.
5.5
Auto-Switching function
The scaler switcher has auto-switching mode and manual-switching mode. When the user
select auto-switching mode, It will follows the following principles:
5.5.1. New input principle
Once a new input signal is detected, the scaler switcher will switch to this new signal
automatically.
5.5.2. Power rebooting principle
The scaler switcher offers the function to remember the signal last used after rebooting. Once
rebooted, it will automatically enter auto-switching mode, and then detect all inputs and
memorize their connection status for future reboots. If the last used input signal is still available,
then it will choose that signal. If not, it will detect all input signals with priority on
HDMI1->HDMI2->HDMI3->HDMI4->VGA (YPbPr/CVBS).
5.5.3. Signal removing principle
Once the current signal is removed, the scaler switcher will detect all input signals with priority
on HDMI1->HDMI2->HDMI3->HDMI4->VGA (YPbPr/CVBS). It will transfer the first signal
Summary of Contents for BZ-SC-51UHD
Page 1: ...BZ SC 51UHD 4K 5x1 Multi format Scaler Switcher...
Page 14: ...14...