BZB Gear BG-UPTZ-12XHSU, User Manual

Page: 23 / 32

20
Push RTMP stream to public network server, the stream camera must be on the public network, otherwise it will
fail to connect to server.
Host address: server address, which can be either a domain name or an IP address
Host port: server default port number
Stream name: live/test (live/ XXX)
Username and password: the username and password set by the server, or leave it empty
Access URL
：
rtmp://host domain name: host port/live/xxx
Or (rtmp://host IP address: host port/live/xxx)
5. Serial port communication and control
The camera could be controlled through RS232/RS485 interface; RS232C serial parameter are as follows:
Baud rate: 2400/4800/9600/115200 bits / sec; Start bit: 1; data bits: 8; Stop bit: 1; Parity: None.
5.1
VISCA Protocol Return Command
Ack/Completion Message
Command packet Note
ACK z0 41 FF Returned when the command is accepted.
Completion z0 51 FF Returned when the command has been executed.
z = camera a 8
Error Messages
Command packet Note
Syntax Error z0 60 02 FF
Returned when the command format is different or when a
command with illegal command parameters is accepted