- 14 / 20
-
Command Code
Function Description
Example
Feedback
Default Setting
r status!
Get device current status
r status!
Get the unit all status:
power, beep, lock, in/
out connection, video/
audio crosspoint,
edid, scaler, network
status
r fw version!
Get Firmware version
r fw version!
MCU BOOT: Vx.xx.xx
MCU APP: Vx.xx.xx
WEB GUI: Vx.xx
r link in x!
Get the connection status of the
x input port
，
x=0~16(0=all)
r link in 1!
hdmi input 1: connect
r link out y!
Get the connection status of the
y output port
，
y=0~16(0=all)
r link out 1!
hdmi output 1: connect
s reset!
Reset to factory defaults
s reset!
Reset to factory defaults
System Initializing...
Initialization Finished!
FW version
x.xx.xx
s beep z!
Enable/Disable buzzer function,
z=0~1(z=0 beep off, z=1 beep on)
s beep 1!
beep on
beep off
beep on
r beep!
Get buzzer state
r beep!
beep on / beep off
s lock z!
Lock/Unlock front panel button,
z=0~1(z=0 lock off,z=1 lock on)
s lock 1!
panel button lock on
panel button lock off
panel button
lock off
r lock!
Get panel button lock state
r lock!
panel button lock on/off
s lcd on time z!
Set LCD screen remain on time,
z=0~4(0:off, 1:always on, 2:15s,
3:30s, 4:60s)
s lcd on time 1!
lcd on 15 seconds
lcd on 30
seconds
r lcd mode!
Get the backlight status of lcd
screen
r lcd mode!
lcd always on
s save preset z!
Save switch state between all
output port and the input port to
preset z
,
z=1~8
s save preset 1!
save to preset 1
s recall preset z!
Call saved preset z scenarios
,
z=1~8
s recall preset 1!
recall from preset 1
s clear preset z!
Clear stored preset z scenarios,
z=1~8
s clear preset 1!
clear preset 1
r preset z!
Get preset z information, z=1~8
r preset 1!
video/audio crosspoint
Output Setting
s in x av out y!
Set input x to output y
，
x=1~16
,
y=0~16(0=all)
s in 1 av out 2!
input 1 -> output 2
PTP
r av out y!
Get output y signal status
y=0~16(0=all)
r av out 0!
input 1 -> output 1
input 2 -> output 2
……
input 16 -> output 16
s hdmi y stream z!
Set output y stream on/off,
y=0~16(0=all)
z=0~1(0:disable,1:enable)
s hdmi 1 stream 1!
s hdmi 0 stream 1!
Enable hdmi output 1
stream
Disable hdmi output 1
stream
Enable hdmi all outputs
stream
Disable hdmi all
outputs stream
enable
r hdmi y stream!
Get output y stream status,
y=0~16(0=all)
r hdmi 1 stream!
Enable hdmi output 1
stream
s hdmi y scaler z!
Set hdmi output y port output
scaler mode
，
y=0~16 (0=all),
z=1~3(1=bypass, 2=4k->1080p,
3=Auto)
s hdmi 1 scaler 1!
s hdmi 0 scaler 1!
hdmi output 1 set to
bypass mode
hdmi all outputs set to
bypass mode
hdmi all outputs
set to bypass
mode
