55
[X]=6, the baud rate is 57600
[X]=7, the baud rate is 115200
The “[YY]=00” represents all HDBT outputs.
The “[YY]=01~08” represents the HDBT
output 1~8.
1 port.
[X]/[YY]:x
xx.
When power off the matrix switcher,
automatically send ASCII command “xxx” to
power off far-end third-party device.
xxx: ASCII string.
The “[X]=1~7” represents the baud rate of
third-party device.
[X]=1, the baud rate is 2400
[X]=2, the baud rate is 4800
[X]=3, the baud rate is 9600
[X]=4, the baud rate is 19200
[X]=5, the baud rate is 38400
[X]=6, the baud rate is 57600
[X]=7, the baud rate is 115200
The “[YY]=00” represents all HDBT outputs.
The “[YY]=01~08” represents the HDBT
output 1~8.
3/01:123456.
When power off the matrix
switcher, automatically send
ASCII command “123456” to
the far-end third-party
device.
The third-party device is
connected to the far-end
HDBaseT receiver of
connecting the HDBT output
1 port.
8.3.7 CEC Control
If the input sources, HDBaseT output devices and local HDMI output devices are
supports CEC, they can be controlled by sending the following command instead of IR
remote.
CEC[I/O][AA][BB][CC][DD].
The “
[I]
” represents the input port. The “
[O]
” represents the output port.
The “
[AA]
” represents the port number. The HDMI input ports are 01~08. The
HDBaseT output ports are 01~08 and the local HDMI output ports are 09~16.
The “
[AA]
” is “
FF
” for sending command to all input or output ports.
The “
[BB]
” represents the device type (e.g. TV: 40/20/80; Blu-ray DVD: 04/08).
The “
[CC]
” represents the function type (e.g. “44”: Remote control).
The “
[DD]
” represents the specific command from the table below.