29
2) Stream Release
Switch:
To turn on/off the main / secondary stream.
Protocol:
primary / secondary stream applies RTMP protocol.
Host Port:
server port number (default 1935, 0-65535 optional)
Host Address:
server IP addresses (default 192.168.5.11)
Stream Name:
choose a different stream name (live / av0, live / av1 optional).
User:
Set the username.
Password:
Set the password.
Click on the "Save" button to display the "Save successful" message, then settings take effect.
Method of obtaining RTSP: RTSP: // device IP address: 554 / live / av0 (av0 mainstream; av1 secondary stream)
3) RTP Broadcasting
Main/Sub Stream:
On/off
Protocol:
RTP or TS
Address: Default
224.1.2.3. It can be edited.
Port: Main Stream Default Port:
4000, Sub Stream Default Port: 4002
Visit:
Address comes up after setting. Eg ; rtp: //224.1.2.3:4000; udp: //@224.1.2.3:4000
3)Video Parameters
a.
Focus: Focus mode, focus range, focus sensitivity can be set.
Focus Mode: set the focus mode (the default auto, manual optional)
Focus range: set the focus range (the default middle, the upper and lower optional)
Focus Sensitivity: Set the focus sensitivity (default is low, high, medium optional)
b.
Exposure: Exposure mode, exposure compensation, back light compensation, anti-flicker, gain limit, wide
dynamic, shutter speed, aperture value and brightness can be set.
Exposure Mode:
Set the exposure mode (the default automatic, manual, shutter priority, aperture priority,
Brightness priority optional)
Exposure compensation:
Exposure compensation setting is active when it is auto status (default is off).
Exposure compensation value:
Set the exposure compensation value, valid when it is set for auto (default 0, -7 to
7 optional).
BLC
: Set back light compensation, valid when it is auto status (default is off).
Anti-flicker:
Set up anti-flicker mode, valid when status of automatic, aperture or brightness priority (default
50Hz, closed, 60Hz optional).
Gain limit:
set the gain limits, auto, active when it is status of aperture or brightness priority (default 4, 0-15
optional).
Dynamic range:
Set the dynamic range (default 4, 1-8 optional).
Shutter speed:
Active when it is status of manual or shutter-priority (default 1/100
，
1/25,1/30,1/50,1/60,1/90,1/100,1/120,1/180,1/250,1/350,1/500,1/1000,1/2000,1/3000,1/4000,1/6000,1/10000
optional).
Aperture value:
Set the aperture value, active when it is status of manual or aperture-priority(default F1.8, closed
F11, F9.6, F8.0, F6.8, F5.6, F4.8, F4.0, F3.4, F2.8, F2.4, F2.0, F1.8 optional).
Brightness:
Set the brightness value, active when it is a state of brightness priority (default 7, 0-23 optional).
c.
Color: White balance, saturation, color, white balance, sensitivity, color temperature, gain red and blue
gain can be set.
White balance modes:
Set the white balance mode (the default automatic, 3000K, 3500K, 4000K, 4500K, 5000K,
5500K, 6500K, 7000K manual, One-push optional).
Note: Click the “Correction” button when selected the One-push white balance mode.
Red fine-tuning:
defaul
t
-10~10 (only available in automatic mode)
Blue fine-tunable:
default
-
10~10 (only available in automatic mode
)
Saturation:
Set the saturation (default 60%, 70%, 80%, 90%, 100%, 110%, 120%, 130%, 140%, 150%, 160%,
170%, 180%, 190%, 200% optional).
Auto white balance Sensitivity:
Sensitivity Auto white balance settings (default is low, high, medium optional).
Chroma
: Set the chroma (default 7, 0-14 optional).
White balance sensitivity
: Set the white balance sensitivity (Default setting: High, with low, middle for options)