properly.
6. Make sure you give the appliance time to cool down. Wait at least 20
seconds between seals. Under very heavy usage, appliance will shut off
automatically to prevent overheating. If it does, wait 25 minutes to allow
appliance to cool off.
How to Make Custom Sized Bags
This vacuum sealer is equipped with a roll holder compatible with various
vacuum sealing rolls, as well as an embedded cutter.
1. Put a roll into the roll storage chamber, pull enough bag material to hold
item to be vacuum packaged, plus 2 inches. Use the embedded cutter
on the sealer to cut desired bag length from the roll. Make sure to cut in
a straight line. Plug in the power cord.
2. Open the lid. Place one end of cut bag onto the sealing bar
, don’t worry
if you accidently place any material onto the gasket area.
3. Close the lid by pressing down on both sides until two
’’click’’ sound
heard.
4. Now that the
lid has been locked, press the ’’SEAL’’ button to create a
custom sized bag. The indicator light illuminates during the seal
process.
5. Once completed the indicator light of seal button will turn off; press the
release buttons on both sides of the machine, it is now safe to take out
the newly created bag.
6. The custom sized bag is now ready for vacuum sealing.
How to Vacuum Seal with the Vacuum Bags
1. Place the item(s) to be sealed into the pre-cut or custom sized bag.
Leave at least 2 inches between the contents and the top of the bag to
allow for bag contraction.
2. Open the lid and place the open end of the bag down into the vacuum
