Byzoo Hippo ZAH01-SV, Manual

Page: 7 / 52

before putting into the bath.
4 If the bag breaks or leaks during cooking, please take it out, clean the water bath
and then start again when newly packed food.
5 If the cooker has a abnormal noise whiling cooking, that is possibly caused by the
impurities sucked into the pump, in this case, stop the machine, clean it and then
restart.
6 After using, please pull the water out of the bath.
CARE & CLEANING
1 Do not leave water sitting in the bath after use. Allow water bath to cool, remove
racks, and use the offset handles for stability, pour the bath contents into the sink.
2 Dry interior with a soft, clean cloth.
3 If impurities are sucked into the pump, please firstly pull the water out of the bath,
take the baffle off using a screwdriver. Then pull in clean water (adding detergent if
necessary) and make the machine work, the water cycle will take out the impurities
gradually, when the cooker is well cleaned, please stop the machine and pull the
waste water out of bath.
4 Never immerse the unit in water or other liquid for cleaning or rinsing.
5 Never use abrasives or harsh chemicals to clean your sous vide.
6 Never put the sous vide in the dishwasher.
TROUBLESHOOTING
POSSIBLE PROBLEMS AND EASY SOLUTIONS
1 Machine won’t start
(1) Be sure the unit is plugged in and the outlet is working.
(2) Make certain to press the START/STOP button successfully. If the unit fails to
start, reposition your finger and press again.
2 Machine beeps during the cooking process
If the water in the bath is lower than the MIN level before and during the cooking
process, the machine will beep and the LCD displayer will show error code E04. In