IP/CCTV
Tester
User’s
Manual
2
2.Introduction
2.1 General
The Camera Wizard II IP/CCTV tester is designed for the installation and maintenance of IP and CCTV
cameras and devices
. CCTV tests:
Video display, PTZ control, DC12V output power, audio test, color
generator, RS485 data decoding, picture and video recording, and image magnification.
IP camera
tests:
IP address scanning, PING testing, Link monitor, POE measurement, Port flicker and CAT5/6
cable testing.
Note: The color LCD screen will only display CCTV images (not IP images).
2.2 Features
High definition 3.5”TFT-LCD color display, 480(RGB)x320 (CCTV only)
Built-in LED flashlight
User-defined shortcut keys
（
F1 and F2
）
Support for both NTSC/PAL video formats
10x zoom feature to magnify the video image (CCTV only)
Record and playback CCTV snapshots and videos using a micro SD card
(removable).
IP address scan to determine an IP camera’s IP address
PING an IP address to verify the connectivity of IP cameras or network devices
POE measurement to test the PoE switch’s voltage to the IP camera
Port Flicker blinks a switch port’s link LED. Perfect for tracing cable locations.
Cable testing jack to test the pairs of a CAT5/6 cable.
Link monitor to display IP address usage on the network.
PTZ address scan to determine the address of a CCTV camera.
RS232/RS485/RS422 communication link to drive the PTZ unit.
PTZ testing for cameras so equipped. Driver supports more than thirty protocols.
DC12V 1000ma power output to temporarily power CCTV camera during test.
Audio input jack to test audio signals
Lithium Ion Polymer Battery . This power-efficient battery can last 11 hours during
normal use. Charging time is 4 -5 hours.
