5
6.
USING THE CD PLAYER - SKIP AND SEARCH FUNCTIONS
This function allows the beginning of a track, or a particular point in a track to be located during play.
To move forward to the next track, press the SKIP UP button. Repeat the action to move to each
successive track. The display will show the track selected and this function works in play, pause and stop
modes.
To move back to the start of the current track, press the SKIP DOWN button. Press again to move back to
the previous track. The display will show the track selected and this function works in play, pause and stop
modes.
To search forward or backwards for a particular point in a track, press and
hold
either SKIP (UP or DOWN)
button to move in the desired direction. When the point in the track has been located, release the button to
resume normal play.
Fig. 3
indicator will illuminate and be
static
in the display and all tracks will replay
continuously.
7.3 To stop the repeat function, press the REPEAT button a third time and the repeat
indicator will disappear.
Repeat indicator
8.
USING THE CD PLAYER - PROGRAMMED (MEMORY) PLAY FUNCTION
This function allows up to 20 tracks to be programmed into the memory and be played in a specific order.
During stop mode
, press the PROGRAM button, ‘01’ will flash in the display.
Using the SKIP (UP or DOWN) buttons move forward or back until the desired track is shown on the display.
Press the PROGRAM button again to store the track into the memory. The display will now show a flashing
‘02’ to indicate that it is ready to program the second track.
Repeat the above step until all the desired tracks have been stored. When the maximum number of
programmed tracks has been reached the display will show a static 1.
When programming is completed, press the PLAY/PAUSE button to start the play. The display will show
the track being played and the play indicator will flash to show that the CD is in program play mode.
When all the tracks have finished playing, the programmed play will stop, the total number of tracks on the
CD will be shown but the play indicator will continue to flash to indicate that it is programmed. Programmed
play can be restarted by pressing the PLAY/PAUSE button again.
To replace a track in the programmed sequence, press the PROGRAM button, wait a few seconds for the
player to scroll through the track numbers programmed until a flashing ‘01’ is shown and then press the
PROGRAM button repeatedly until the position number is shown (e.g. 02) then use the SKIP (UP or DOWN)
button to select the desired track and press the PROGRAM button to accept and overwrite the track.
To add a track at the end of the programmed sequence press the PROGRAM button (as described in step
8.6), to move to the end of the sequence then use the SKIP (UP or DOWN) buttons to locate the new track
and press the PROGRAM button a final time to accept. For example if three tracks have been programmed
and a fourth is required, press the PROGRAM button four times, then select the new track number with the
SKIP (UP or DOWN ) buttons and press the PROGRAM button again to accept.
To clear the programmed tracks, press the STOP button, open the CD door or turn off the power
.
7.
USING THE CD PLAYER - REPEAT PLAY FUNCTION.
This function allows the same track or all tracks to be played repeatedly.
7.1 To repeat the SAME track, press the REPEAT button ONCE during play. The repeat
indicator (fig. 3) will illuminate and
flash
in the display and the track playing will play
Track
continuously.
7.2 To repeat ALL tracks, press the REPEAT button TWICE during play mode. The repeat
