Byron DIC-24512, Instruction Manual

Page: 6 / 70

Instruction manual
6
5. Open gate
6. Open door lock
7. (-) button
2.3 OUTDOOR UNIT (DOORBELL)
1. Microphone
2. Camera lens
3. Night vision light
4. Speaker
5. Call button
3 Installation
3.1 FIX THE MOUNTING PLATE OF THE
INDOOR UNIT (MONITOR)
To mount the monitor, you will need the following tools:
ü A suitable screwdriver for the included screws.
ü
A drill and suitable drill bit for the included screw plugs.
A. Position the provided mounting plate where desired.
B. Mark the screw positions with a pen.
C. Drill the necessary holes.
D. Insert the plugs.
E. Pull the required cables through the mounting plate.
F. Fasten the mounting plate with the screws.
3.2 FIX THE MOUNTING PLATE OF THE
OUTDOOR UNIT (DOORBELL)
To mount the outdoor unit, you will need the following tools:
ü
A suitable screwdriver for the included screws.
ü A drill and suitable drill bit for the included screw plugs.
A. Position the provided mounting plate where desired.
B. Mark the screw positions with a pen.
C. Drill the necessary holes.
D. Insert the plugs.
E. Use a knife or sharp object to puncture the cable gland.
F. Pull the required cables through the cable gland.
G. Fasten the mounting plate with the screws.
3.3 ELECTRICAL INSTALLATION
3.3.1 Connecting the indoor unit (monitor) to
the outdoor unit (doorbell)
To connect the terminal blocks, you will need the following tool:
ü A small flat head screw driver.
A. On the indoor unit (monitor): Loosen the terminal screws. (See
sticker on the indoor unit for position.)
B. Insert the wires with the cable shoes (See sticker on the indoor
unit for position.)
C. Fasten the terminal screws.
D. On the outdoor unit (doorbell): Loosen the terminal screws. (See
sticker on the outdoor unit for position.)
E. Insert the wires. (See sticker on the outdoor unit for position.)
F. Fasten terminal screws.