Byron DIC-24312, Instruction Manual

Page: 8 / 81

Instruction manual
9
No: Button: Description
7 Monitor/
intercom Used to communicate with the outdoor unit
Table 1: Buttons and functions
5 Frequently asked questions
Problem Solution
• The indoor unit does not
switch on. • Make sure that the monitor is
connected to the power
source.
• Make sure the adapter plug is
properly pushed in to the
power outlet.
• The ring tone volume is too
low. • Perhaps you extended the
cable. Extending the cable
can reduce the volume due to
being too long or too thin.
• I connected the indoor unit to
a lock but it does not work. • Check if the lock is connected
properly and that a suitable
lock with an external power
source is used.
• I hear interference on the line. • Move other electronics away
from the unit to minimize
interference.
• Perhaps the cable is too long
or the wire too thin.
• There is no sound between
the outdoor unit and the
indoor unit. • The microphone may be
obstructed. Clean the
microphone.
• Check that the cables are
connected and fastened
properly.
6 Specifications
Monitor
Screen size 7"(Diagonal) inch
Color Configuration R.G.B.delta
Video System PAL/NTSC
Effective Pixels 800X3(RGB)X480
Consumption Current 480~570mA
Operation Temperature -10°C ~ +50°C
Operation Humidity 85%(Max)
Supply Voltage DC 15V 1A
Doorbell
Imaging Sensor Type 1/4 “ CMOS
View Angle 110o
Minimum Illumination 0Lux
EN