Byron DIC-24112, Manual

Page: 9 / 68

Smartwares Basic functions | 4
DIC-24112 9
4.3.2 Registering a user tag
ü Your doorbell is in standby mode.
ü You have a registered administrator tag.
ü
You have a unregistered user tag.
a) Swipe your administrator tag across the RFID sensor on your doorbell.
b) Within 10 seconds, press the call button.
ð
The LED will flash red, and the device will beep.
c) Now swipe the unregistered user tag across the RFID sensor on your doorbell.
ð The device will beep several times to indicate your tag has been registered.
4.4 Cancelling a RFID tag
ü The doorbell is in standby mode.
ü You have an administrator tag ready, and a tag that needs to be cancelled.
a) Swipe the administrator tag. The LED will light up white.
b) Within 10 seconds, press the call button. You will hear a beep, and the LED will
start flashing red.
c) Swipe the administrator tag again.
d) Now swipe the tag that you want to cancel. The device will beep to indicate that
the card has been unpaired.
4.5 Cancelling all RFID tags
You wish to cancel all RFID tags.
ü You have an administrator tag ready.
ü Your doorbell is in standby mode.
a) Press and hold the call button on your doorbell for 3 seconds.
ð You will hear a beep sound, and the LED ring will light up red.
b) Swipe the administrator tag on the RFID sensor.
ð
The doorbell will start beeping at a regular interval.
c) Press and hold the call button until you hear a beep sound.
ð All your RFID tags are now cancelled.