ByoPlanet ByoPack P2-CBP515 Operator'S Manual Download Page 5

 

  EN

  | 5

Protective Gear

•  PPE must comply with the American National Standards 

Institute’s ANSI Z87.1-1989 standard if purchased after July 5, 
1994, or ANSI Z87.1-1968 or with the standard of the country  
in use.

•  Eye and face PPE shall be distinctly marked to facilitate 

identi

cation of the manufacturer as indicated by OSHA  

standard (1910.133[a][4]).

•  The following minimum requirements must be met by all 

protective devices. Protective devices shall:

-  Provide adequate protection against the particular hazards  

for which they are designed

-  Be of safe design and construction for the work to be 

performed

-  Be reasonably comfortable when worn under the designated 

conditions

-  Fit snugly and not unduly interfere with the movements  

of the wearer

-  Be durable

-  Be capable of being disinfected

-  Be easily cleanable 

-  Be distinctly marked to facilitate identi

cation only  

of the manufacturer

THE USE OF EYEWEAR PROTECTION IS RECOMMENDED 
WHEN USING THIS DEVICE.
ALWAYS USE APPROPRIATE PPE, LISTED ON THE BYOPLANET

®

-

APPROVED PRODUCT’S SAFETY DATA SHEET (SDS).  
BYOPLANET

®

 SDSs CAN BE FOUND AT 

 

WWW.BYOPLANET.COM.

IMPORTANT SAFETY PRECAUTIONS

When using an electrical appliance, it is important to understand 
that some circuits are electrically live, even when the power switch 

followed to reduce the risk of burns, 

re, electrical shock, injury 

and/or death. 

Power Connection

Power plug must be used with a three-pronged, grounded outlet, 
rated for no less than 15A service. Always verify before product 
use. Depending on speci

c model, this appliance is for use on a 

nominal 120V/60Hz circuit with a veri

ed ground plug. Check with 

a quali

ed electrician to ensure you have the correct electrical 

service and grounding.

Grounding Instructions

This appliance must be grounded. In the event of malfunction 
or breakdown, grounding provides a path of least resistance 
for an electric current to reduce the risk of electric shock. This 
appliance is equipped with a cord having an equipment-grounding 
conductor and a grounding plug. The plug must be plugged into 
an appropriate outlet that is properly installed and grounded in 
accordance with all local codes and ordinances. Do not use an 
adapter with this product except to provide ground fault circuit 
interrupter (GFCI) protection.

DANGER:

 Improper connection of the equipment-grounding 

conductor can result in a risk of electric shock. The conductor with 
insulation having an outer surface that is green, with or without 
yellow stripes, is the equipment-grounding conductor. If repair or 
replacement of the cord or plug is necessary, do not connect the 
equipment-grounding conductor to a live terminal. Check with a 
quali

ed electrician or serviceman if the grounding instructions are 

not completely understood or if in doubt as to whether the appliance 
is properly grounded. Do not modify the plug provided with the 
appliance — if it will not 

t the outlet, have a proper outlet installed by 

a quali

ed electrician. Do not use an adapter with this product except 

to provide ground fault circuit interrupter (GFCI) protection.

Extension Cord

1.  The unit is supplied with an extension cord. If the provided 

extension cord becomes damaged or if you wish to purchase 
additional extension cords or other replacement parts you may 
contact www.byoplanet.com  for spare parts purchase. 

2.  ByoPlanet

®

 recommends using a 16-gauge extension cord no longer 

than 100 feet (30.5m). Be aware that an undersized extension 
cord will cause a drop of in-line voltage, which could result in a 
loss of power, damage to the product and/or overheating. Always 

3.  Make sure your extension cord is in good condition. Inspect cords 

periodically and replace if damaged. A damaged cord can impact 
the unit’s electrostatic performance or lead to injury. 

4.  For outside or wet environment application, use a GFCI (ground 

fault circuit interrupter) inline adapter or outlet to help avoid 
risk of electrical shock. GFCI should be placed as close to outlet 
as possible.

Shock/Electrical Hazard

As with most electrical appliances, electrical parts are electrically 

electric shock or injury:

1.  Use this unit only for its intended use, as described in this manual.

2.  Do not use while bathing.

3.  Do not place or store unit where it can fall or be placed in water 

or other liquid.

4.  If unit falls into water, unplug immediately. Do not reach into 

water to retrieve.

5.  Never operate this unit if the unit shows sign of physical 

damage, e.g., impact damage from a severe drop, or is working 
improperly. For technical support or spare parts purchase 
contact ByoPlanet

®

 support at 

 

www.byoplanet.com.

6.  Keep sprayer and cord away from heated surfaces.

7.  Never block the air openings of the unit or place it on a soft 

surface (bed or couch), where the air openings may become 
blocked.

8.  Never drop or insert any object into any opening on the sprayer.

9.  Do not use with a damaged or broken extension cord.

10.  Never use or store at a temperature above 100°F (38°C).

CAUTION: Electrostatic nozzle. Do not touch or insert any foreign 
object into the nozzle.

COVER OF 

GROUNDED 

OUTLET BOX*

GROUNDING 

PIN

*120-volt grounded connectors shown. 220/240-volt grounded connectors will 

Summary of Contents for ByoPack P2-CBP515













Reviews: