Finishing up & Troubleshooting
Screw on the base of the enclosure and add the bumpers (unless you don't like bumpers on
your pedals).
Is you pedal working? Here s a few common mistakes:
1.
No sound at all in either the bypass or on position.
If you aren t getting sound in
bypass then you did not wire your footswitch correctly. Getting the bypass to work is the first
thing you need to worry about.
2.
Bypass works and the LED lights up when on , but there s no sound.
You either
have a problem with the wiring from the in to the out of the circuit board and foot switch. .
Or you have a problem with something on the circuit board.
3.
Bypass works, but there s sound when on and the LED does not come on
. You
probably aren t getting any power to the circuit. .
If none of this helps, and you can t seem to figure out the problem, I always find that it is best
to just set the pedal aside for a day or 2 and then come back to it with a fresh pair of eyes.
Then the problem usually jumps right out at you .usually.
If you still can t get it working, start a thread on the BYOC forum and ask for help.
board.buildyourownclone.com
Copyright ©2007. Build Your Own Clone
