17
Step 2:
Cut 4 x 3/4” pieces of wire. Strip 1/8” off each end. These will be used to connect
lugs/eyelets 1, 2, 7, & 8
Cut 1 x 1” piece of wire. Strip 1/8” off each end. This will be used to connect
lug/eyelet 5
Cut 1 x 1.5” piece of wire. Strip 1/8” of one end. Strip 1/2” off the other end. This
will be used to connect lug/eyelet 4. The longer stripped end will be used to jumper
lug 4 to 9.
Cut 3 x 2” pieces of wire. Strip 1/4” off each end. These will be used to connect the
tip and sleeve of the IN jack and the tip of the OUT jack to the PCB.
Summary of Contents for Octave Fuzz
Page 19: ...20 ...
