Populating the Circuit Board
Step 1:
Add all the resistors. Resistors are not polarized and can be inserted
in either direction.
Be aware that the 120 Ohm resistor and the 10k resistors have similar band colors.
To help differentiate the two, you can look at the 10k and 120 Ohm resistors side by side.
The 120 Ohm resistor will be slightly different in that the tolerance band will be slightly
moved away from the other bands.
If it’s not easy to differentiate the two, use a multimeter to find the value.
Summary of Contents for Large Beaver Ram's Head
Page 16: ...Step 2 Install the 1 4 enclosed jacks to the enclosure...
Page 20: ...Step 2 Wire the PCB to the foot switch and jacks as shown...
Page 22: ...For hi res schematic visit http www byocelctronics com largebeaverramschematic pdf...
Page 23: ...Please visit http byocelectronics com board for any technical support Copyright 2018 BYOC Inc...
