Resistors:
Parts Checklist for Germanium Boost Kit
1 – 3k9
(Orange/White/Black/Brown/Brown)
1 - 4k7
(Yellow/Purple/Black/Brown/Brown)
2 - 470K
(Yellow/Purple/Black/Orange/Brown)
Visit
www.byocelectronics.com/resistorcodes.pdf
for more information on how to
differentiate resistors.
Capacitors:
1 - .0047 film cap (may say “472” or “4n7” on the body)
1 - .01 film cap (may say “103” or “10n” on the body)
1 - .033 film cap (may say “333” or “33n” on the body)
1 - .1 film cap (may say “104” or “100n” on the body)
2 - 47uf Aluminum Electrolytic
Visit
www.byocelectronics.com/capcodes.pdf
for more info on how to differentiate
capacitors.
Transistor:
1 - TO-1 Socket (3-pin)
1 - OC44, OC75, OC76 or CV7003 PNP germanium transistor
Trimpots:
1 – 100K Trimpot
Potentiometers: SNAP THE SMALL TABS ON THE TOP OF THE POTS OFF WITH A
PAIR OF NEEDLE NOSE PLIERS
1 - A10k audio (logarithmic) taper
Summary of Contents for Germanium Boost
