BYOC E.S.V. Fuzz Germanium, Instructions Manual, Page: 6 / 29

Parts Checklist for ESV Fuzz PNP Positive Ground Kit
Resistors:
2 – zero ohm jumpers (single black stripe)
1 - 470ohm (yellow/purple/brown/gold)
1 - 4.7k (yellow/purple/red/gold)
1 - 33k (orange/orange/orange/gold)
1 - 100k (brown/black/yellow/gold)
1 - 1M (brown/black/green/gold)
Trimpot:
1 - 25k trimmer
Capacitors:
1 - 0.01uf film
1 - 2.2uf aluminum electrolytic
1 - 22uf aluminum electrolytic
Transistors:
2 – AC128 Germanium Transistors
2 - Transistor sockets
Potentiometers: SNAP THE SMALL TABS ON THE TOP OF THE POTS OFF WITH A
PAIR OF NEEDLE NOSE PLIERS
1 - A500K Audio Volume pot
1 - B1K Linear Fuzz pot
Hardware :
1 - predrilled enclosure w/ 4 screws
1 - esv fuzz kit circuit board
1 - 3pdt footswitch
2 - knobs
1 - AC adaptor jack
1 -
¼ ”stereo jack
1 - ¼ ” mono jack
1 - battery snap
1 - red LED
hook-up wire