Section 4 - Assembling Your Guitar
Quilt Top Section 4
- 6 -
4.7
Tremolo Claw Adjustment
The overall objective of this adjustment is to use the Tuners & claw tension adjustment to have the
bridge base elevated 1/16”, parallel to the Body and the guitar close to tune.
4.
Recheck the height of the
Bridge base ensuring the base is 1/16” on both sides of th
e Bridge
–
adjust if necessary;
5.
Tune the low E string with the tuner
–
check base and Body for being parallel. Tighten claw to
return to parallel if necessary. Ensure equal adjustment of both screws so claw remains parallel
to Tremolo block;
6.
Repeat 1&2 on remaining strings.
7.
Recheck tuning on all strings
–
repeat 1, 2 & 3 as necessary.
8.
Install the Tremolo, Audio and Switch covers over the rear pockets
using supplied 3/8” screws.
Assembly of
your
Guitar is now complete
–
let’s
set it up!!
