background image

Introduction

 

J Bass Intro - 2 - 

Contents ......................................................................................................... 

Error! Bookmark not defined.

 

Introduction ...................................................................................................................................... - 3 - 

1.1 

Material Check List .................................................................................................................... - 5 - 

1.2 

Additional tools/materials required: ........................................................................................ - 7 - 

2

 

Mockup and Fit Check

 .................................................................................................................. - 1 - 

2.1

 

Check Guitar Body & Neck mounting holes

 ...................................................................... - 1 - 

2.1.1

 

Drilling the Mounting Holes in the Guitar Body

 ...................................................... - 1 - 

2.2

 

Checking the Mounting Holes in the Neck

 ........................................................................ - 2 - 

2.2.1

 

Drilling Mounting Holes in the Neck

 ......................................................................... - 2 - 

2.3

 

Check the Neck to the Body Fit

 ........................................................................................... - 2 - 

2.4

 

Fit check & alignment of the Pickguard and the Audio Controls (items 2 & 3 on 

materials list)

 ..................................................................................................................................... - 3 - 

2.5

 

Fit check the Bridge

 .............................................................................................................. - 3 - 

2.6

 

Check Strap Pins

 .................................................................................................................... - 4 - 

2.7

 

Check Tuner Alignment

 ....................................................................................................... - 4 - 

2.8

 

String Tee Position

 ................................................................................................................ - 4 - 

2.9

 

Mockup and Fit Check complete!

 ....................................................................................... - 4 - 

Finish ................................................................................................................................................. - 1 - 

3.1 

Finish Application Steps ............................................................................................................ - 1 - 

3.1.1 

Solid Color finish: .............................................................................................................. - 1 - 

3.1.2 

Pigmented Translucent, Gel stain or alcohol dye finish:................................................... - 2 - 

3.1.3 

Penetrating Stain or water based dye finish: .................................................................... - 2 - 

3.2 

Explanation of Sequence Steps: ................................................................................................ - 2 - 

3.2.1 

Sanding the Body and Neck .............................................................................................. - 2 - 

3.2.2 

Appling Grain Filler ............................................................................................................ - 3 - 

3.2.3 

Applying Sanding Sealer .................................................................................................... - 3 - 

3.2.4 

Solid Color Primer ............................................................................................................. - 3 - 

3.2.5 

Burst and Translucent finishes .......................................................................................... - 3 - 

3.2.6 

Clear Top coats .................................................................................................................. - 4 - 

3.2.7 

Buff finish .......................................................................................................................... - 4 - 

4.1 

Attach the Neck to the Body ..................................................................................................... - 1 - 

4.2 

Installing Component Wiring & Installation .............................................................................. - 1 - 

4.2.1 

Preparation & Installation of the Pickups and Audio Panel .............................................. - 2 - 

4.2.2 

Bridge & Frame Ground Wire Installation ........................................................................ - 3 - 

4.3 

Installing the Nut ....................................................................................................................... - 3 - 

Summary of Contents for J Bass





























Reviews: