background image

z

 Never insert any objects or limbs into the device. 

z

 

Do not use the device in potentially explosive rooms. 

z

 

Do not use near open flames. Do not store near heat sources. 

z

 Do not place any objects, e.g. clothing, on the device. 

z

 Do not use the device outdoors. Do not place the device on wet or flooded ground.

   

z

 

Do not unplug by pulling on the cable. To unplug, grasp the plug, not the cable. 

z

 

Do not stretch the cable or place the cable under strain.   

Keep cable away from heated surfaces. 

z

 

Do not stretch the cable or place the cable under strain. Do not run the cable under carpeting. Do 

not cover the cable with throw rugs, runners, or similar coverings. Do not route the cable under 

furniture or appliances. To avoid a tripping hazard arrange the cable away from traffic areas so that 

it will not be tripped over

DŽ

 

z

 

Do not use on soft surfaces, such as a bed, where openings may become blocked. 

z

 

Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains, at 

least 0.9m (3 feet) from the front of the appliance and keep them away from the sides and rear when 

the appliance is plugged in. 

z

 

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly 

qualified persons in order to avoid a hazard. 

z

 

If there is a loose fit between the plug and the socket or the plug becomes very hot, the socket may 

need to be replaced. Check with a qualified electrician to replace the socket. 

z

 

Turn off all controls before unplugging. Unplug before connecting any tool or accessory. 

z

 

Allow the device to cool down before transport and / or maintenance work. 

z

 

Do not privately disassemble the device or replace parts, otherwise it may cause mechanical failure, 

electric shock, fire or body injury. 

z

 

The warranty is not applicable for the product fault caused by private disassembly. 

 

Warning

˖

   

Do not cover.

       

Insert the mains plug into an outlet that is properly installed and grounded.   

Do not locate directly below a mains electricity supply socket

Summary of Contents for Smart Mirror

















Reviews: