BYD EPS14, Service Manual, Page: 15 / 60

EPS14
11 SM-EPS142016002-EN
DRIVE AXLE AND WHEEL
Drive Wheel Replacement
Use the floor jack to raise the turk, and then place the hardwood block under it. Loosen the nuts to replace the wheel.
12
11
Code Name QTY Information
11 Hexagon Nut 5 90 N-m
12
Spherical Spring Washer
5
Gear Oil Level Checking
(1) Clean the surrounding areas around the oil filler plug, and then unscrew it with the seal.
(2) Check the oil level. The correct oil level and the correct oil quantity is achieved when the oil level is at the lower edge of the
oil filler plug. Add gear oil if necessary.
(3) After checking, screw in the oil filler plug with the sealing ring.
11
12
Code Name QTY Information
11 Oil Filler Plug 1 30 N-m
12
Seal
1
Caution
(2) When filling the oil, care about the condition around to prevent dust and water entering the gear box.
(3) The correct oil level and the correct oil quantity is achieved when the oil level is at the lower edge of the oil filler plug
Gear Oil Replacement
(1) Clean the surrounding areas around the oil filler plug and the oil drain plug, and place a suitable vessel under the oil.
(2) Unscrew the oil filler plug and the oil drain plug with sealing rings.
(3) After draining, screw in the oil drain plug with the new sealing ring.
(4) Add gear oil until the oil level is at the lower edge of the oil filler plug. Screw in the oil filler plug with the sealing ring.