51
Copyright© BYD Europe B.V. all rights reserved.
9. Trouble Shooting.
Commissioning.
Refer to the documentation of the Inverter manufacturer.
Errors of System:
The system
display warning and errors messages on user’s EMS interface.
As an option,
messages also could be sent to Users Email. These messages will be displayed until the errors
was corrected or no longer detected.
Please refer
Inverter/EMS Manufacture’s instruction.
Errors of Battery:
Check the indicators on the front PDU to determine the state of the battery/DC side.
An error state of battery is displayed on the LED indicator. Which will be showed as RED light.
The Warning is triggered when the voltage, temperature, current, etc, is detected beyond
designed limitations.
The Battery/BMS keep sends status messages to Inverter/EMS. The system will be adjusted
or stopped immediately when errors was detected.
Always follow the procedures showed in below table to handle errors or event messages.
If errors persist, please contact the BYD service line.
