BYD ATTO 3 2022 Owner'S Manual Download Page 133

Page: 133 / 201

132

WARNING

•

Do not hang heavy objects from the

rear view mirror, or forcefully shake or

drag it.

•

When manually adjusting the rear

view mirror, do not adjust forcibly if it

gets stuck.

•

Do not adjust the rear view mirror

while the vehicle is in motion, as it

may distract the driver's attention.

Manual Anti-Glare Rear View

Mirror*

• Normal mode - rotate the control stick

left to get the clearest mirror image.

• Anti-glare mode - rotate the control stick

right to effectively reduce interference

from rear vehicle headlights. Note that

anti-glare may lower the clarity of rear

visual field.

Electronic Side Mirrors

Side Mirror Adjustment Buttons

Manually folding side mirrors

Manually folding side mirrors
Push the outer edge of the side mirror to

rotate the mirror body around the folding

axis to the locked position.

Auto fold of side mirrors

• Press the fold button

to fold both

left and right side mirrors, which will

return to their pre-folding position if this

button is pressed again.

• The left side mirror can be selected

by pressing the corresponding auto
regulation switch

• Side mirror auto-fold can be controlled

by tapping on

→

Vehicle settings

→

External rearview mirrors

→

Auto-

Fold

Summary of Contents for ATTO 3 2022










































































































































































































Search results

Summary of Contents for ATTO 3 2022

Reviews:

Related manuals for ATTO 3 2022

Brands by name

Popular brands

BYD ATTO 3 2022, Owner'S Manual

Search results

Summary of Contents for ATTO 3 2022

Reviews:

Related manuals for ATTO 3 2022

Brands by name

Popular brands