BYD ATTO 3 2022, Owner'S Manual

Page: 116 / 201

115
USING AND DRIVING
05
• When the cluster shows the speed is
over 5 km/h above the identified speed
limit, the icon on the cluster flashes
to alert the driver. When the system
identifies the end of speed limit icon or
after the vehicle travels for a while, the
speed limit icon disappears.
Precautions
• The speed limit icon disappears within a
certain distance after system recognition.
The driver must control speed within
range.
• The traffic sign recognition system can
identify speed limit signs only, and will
not control speed.
• In case of lanes with different speed
limits, the system identifies the sign of
the corresponding lane, and the driver
must remain in such lane.
• Weight limit signs not in standard size as
per national regulations may mistakenly
be identified as speed limit signs.
• If the speed limit sign is unclear or
distorted, inclined, reflective, partly
covered or overlaid, the camera may be
unable to identify the sign completely or
clearly.
• The performance of the traffic sign
recognition system depends on weather
conditions, light and visibility. The
system cannot identify signs at night or
sunset; in rain, fog, haze, snow or dust;
when light is coming from the back of
the vehicle, or when there is a sudden
change in lighting.
• In case there is a collision, or the camera
sensor is reassembled, go to a BYD
authorized dealer or service provider for
sensor calibration to prevent the system
performance from being affected.
Lane Keeping System*
• The lane keeping system (LKS) supports
lane departure warning and lane
departure prevention functions.
• Lane departure warning detects the
lane lines ahead through a multi-
functional video controller. When speed
is above 60 km/h, the system will notify
lane departure with visual, sound and
vibration warnings.
• Lane departure prevention provides
steering assistance to prevent departure.
• When the Emergency Lane Keeping
Assist is activated, the system will
provide reverse torque or steering angle
to control vehicle steering and help the
driver keep the vehicle in its current lane
when it is about to depart from a lane
(solid/dashed line), in order to prevent
it from crossing the edge of the road or
colliding with oncoming or overtaking
vehicles in the adjacent lanes.
• To enable or disable the LKS, tap on
→ Dipilot → Driving Assist → Lane
assist . When the vehicle starts, the
system defaults to the previous settings.
• Warnings include: sound warning only,
or steering wheel vibration*, or both*.