INTRODUCTION
Thank you for purchasing a by.schulz product. Please
read the manual carefully before installation and usage. If
you have any further question please contact your specia-
list dealer. Have a great ride!
TABLE OF CONTENTS
Page
1. Usage Permission
02
2. Delivery Contents
02
3. Safety Instructions
02
4. Technical Data
03
5. Function
03
6. Components
04-05
7. Spring Elements
05
8. Installation Requirements
06
9.1 Seatpost Installation
06
9.2 Saddle Installation and Adjustments
07
10. Changing the Spring Element
08-09
11. Maintenance and Care
10
1. USAGE PERMISSION
by.schulz products (e.g. the speedlifter system) are availa-
ble on the bike market for more than 20 years. By.schulz is
an international supplier for bike manufacturer, wholesale
dealers and dealers. Multiple components are standard
equipment on bicycles, cross country MTB, pedelecs and
e-bikes.
The G.2 ST/ G.2 LT seat post is suited for use in bicycles,
pedelecs and e-bikes up to 45 km/h. It is not usable for ext-
reme stress such as downhill riding, dual slalom, free-riding
or riding with jumps.
The G.2 ST/ G.2 LT seat post is forged from aluminium
and is tested according to the DIN norm and approved:
City
Trekking
DIN EN
ISO 4210
Ebike
bis 25km/h
Pedelec
DIN EN
ISO 15194
Speed-Ebike
bis 45km/h
S-Pedelec
DIN EN
ISO 15194
MTB
Cross Country
DIN EN
ISO 4210
2. DELIVERY CONTENTS
· Seatpost
· Mudcover (nicht bei Erstausstattung)
· Operating instructions
3. SAFETY INSTRUCTIONS
Before the first ride:
We strongly recommend checking the overall fitness of the
bicycle and the operational safety of the seat post before
each ride. Start with checking if the saddle is firmly atta-
ched in the saddle clamp. Then make sure that the seat
post tube is firmly attached to the bicycle frame without
slack. It must be clamped in the desired position so that
it cannot be turned or shifted inside the seat post tube.
Please note that the minimum insertion depth of the seat
post is 90 mm.
4. TECHNICAL DATA
1
. This instruction contains important informa-
tion about the proper installation, usage, and
maintenance of the G.2 ST/ G.2 LT seat post. Please
take the listed warnings and safety instructions seri-
ously. Otherwise personal injury and material dama-
ge may occur, for which the dealer or manufacturer
is not liable.
2.
In order to avoid further risks of accidents the seat
post must be replaced after damaged due to a fall or
accident.
3.
Child seats, trailer couplings or luggage racks
may not be attached to the G.2 ST/ G.2 LT seat post
because this can lead to breakage or damage.
4.
Always use the neoprene mud cover to cover the
spring mechanism when a child seat is installed be-
hind the seat post. The cover prevents the child’s
finger from getting caught in the spring mechanism.
There is considerable risk of injury for the hands of
the children when no cover is used!
5.
The installation is easy with bicycles and e-bikes,
but please be aware of the installation requirements.
If you do not have the appropriate expertise, we
strongly recommend the installation by a specialist
dealer.
02/12
This symbol indicates an important screw
connections, and the screw must be tightened
with an specific tightening torque. The correct tigh-
tening torque is either listed on the part itself or in the-
se operating instructions. A torque wrench is required
for proper installation Screws that are not tightened
correctly, may loosen or break without warning. This
may cause a fall and lead to personal injuries and
material damage.
Instal Operating Instructions G.2 ST / LT Seatpost
