BXB ELECTRONICS CO., LTD.
13
Copyright © 2011 BXB ELECTRONICS CO., LTD. All rights reserved.
Operations & Settings
1. USING MIC ID
1.1 When the conference unit is using, the red LED of microphone will be constantly on. Meanwhile,
its ID code will be displayed on the LCD of main control unit.
1.2 Less than 3 using microphones, you can see the ID code on the preset menu.
1 N O :
0 0 1 0 0 2 0 0 3
2 M O D E :
N o r m a l
3 O P E N - M I C :
0 2 M i c
4 A U T O - O F F :
3 0 S e c
1.3 Over 3 using microphones, ”
” icon will be displayed on the up-right of the LCD
，
By
pressing the ” MODE “ button,LCD screen will be showed ”
◘” press “UP” and ”DN” button to
check the ID code of using microphone.
1
◘
N O :
0 0 1 0 0 2 0 0 3
2 M O D E :
N o r m a l
3 O P E N - M I C :
0 2 M i c
4 A U T O - O F F :
3 0 S e c
1.4 The symbol of”
◘” icon indicates the operating and setting function is activated. You could repeat
this action to operate and set up all conference modes.
Note:
All the figures shown on this manual is only an example. Each main control unit has been through a
series of quality testing during the process of manufacturing. Due to the default setting is not
identical, users can change the settings simply followed by the instruction manual.
