DE
DE
5
4
1
Safety Instructions
1�1
General safety instructions
The product was manufactured according to all
recognised regulations and technical standards and
was in compliance with the relevant legal require
-
ments when it was put into circulation.
Nevertheless, it can pose a risk of personal injury
or property damage if you do not observe this
chapter and the safety instructions throughout this
documentation.
● Read this documentation thoroughly and in full
before working with the product.
● Retain the documentation in such a way that it is
accessible to all users at all times.
● Always hand over the product to third parties
together with the full documentation.
● Follow all of the instructions in relation to the
proper handling of the product.
● If you detect damage to the product or the mains
supply, stop its operation and notify a service
technician immediately.
● Use only accessories, spare parts and consuma
-
ble materials that have been approved by BWT.
● Adhere to the environmental and operating con
-
ditions specified in the “Technical data” chapter.
● Use your personal protective equipment. It en
-
sures your safety and protects you from injury.
● Only perform tasks that are described in these
operating instructions or if you have been trained
to do so by BWT.
●
Perform all tasks in compliance with all applicable
standards and provisions.
● Instruct the operator in the function and operation
of the product.
●
Instruct the operator in the maintenance of the
product.
● Instruct the operator in relation to potential dan
-
gers that may arise while operating the product.
1�2
Scope of the documentation
This documentation applies exclusively to the
product the production number of which is listed in
chapter 12 “Technical Data”.
This documentation is intended for operators,
installers without training from BWT, installers with
training from BWT (e.g. drinking water specialists),
and BWT service technicians.
This documentation contains important information
for fitting the product safely and properly, starting
up, operating, using, maintaining, and disassem
-
bling the product, and for correcting simple faults
independently.
Read this documentation in full before working with
the product. Pay particular attention to the chapter
“Safety Instructions”.
1�3
Personnel qualifications
The installation work described in these instructions
requires basic knowledge of mechanics, hydraulics
and electrical systems as well as knowledge of the
corresponding specialist terms.
To ensure that the device is installed safely, this work
must be performed only by a qualified specialist or
a trained person under the guidance of a qualified
specialist.
A qualified specialist is anyone who can assess the
work assigned to him or her, identify potential risks,
and take suitable safety measures thanks to his or
her specialist training, knowledge and experience
as well as his or her knowledge of the applicable
regulations. A qualified specialist must comply with
the applicable specialist regulations.
An instructed person is anyone who has been
instructed and, if necessary, trained by a qualified
specialist in the transferred tasks and the potential
risks presented by improper behaviour and who
has been educated about the necessary protective
equipment and measures.
1�4
Transport and installation
To avoid damage during transport to the installation
location, do not remove the BWT product from the
packaging until you have reached the relevant lo
-
cation. Then dispose of the packaging in the correct
manner. Check that the delivery is complete.
If there is a risk of frost, drain all components that
convey water.
Lift or transport the product or its components only
from the designated suspension eyes or attachment
points, if present.
The product must be installed or mounted on a suf
-
ficiently strong and level horizontal surface and must
be adequately secured against falling or tipping.
